Sistem kontrol mesin derek listrik 9-30v Aksesori Mobil remote control nirkabel SUV gerbang penggulung

操作指引

黄色白色线需要连接继电器，请先检查您的绞盘是否配备继电器

使用方法简单，附带说明书。

一共五根线 ，蓝色天线，红色、黑色接电源。

黄色白色是开关线正反线，

与继电器上有标C1/C2的接线柱相连（和您绞盘上原来的手柄线相连）

厂家直销 强抗干扰汽车绞盘无线遥控器 绞盘控制器，遥控距离可达30M.

本厂采用的遥控编码是为百万唯一码，不同于市面上一般的大多数绞盘遥控是用2272芯片做的最多才6500组编码，

抗干扰能力差，成本低，但价格卖高的多。

本厂的绞盘遥控器，与市面上其他厂家产品相比较，在抗干扰能力、遥控距离、质量等都具有优势。

链接拍下的是一个遥控器的价格，可根据客户的要求定制生产多个遥控器。

请注意遥控器我厂遥控延时时间0.2秒和市面上的（0.5秒）的延时，强了好多倍，有效防止绞盘电机拉坏现象，

30米以内无抖动，不要亲信什么加延时防抖动，才是正品绞盘遥控器。

100% Brand new and high quality , Latest heavy duty long range model .
Wireless remote works lets you operate your winch from up to 50 ft without cables or switches.
Just press the remote transmitter and you're ready to operate your winch Start, stop, in or out.
Work with any Tuff Stuff or Recon Recovery winch as well as most Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog and many other brands of self-recovery winches

Specification:
Voltage: 9-30V
Frequency: 434MHz (433.92MHz)
Remote size: about 150 x 78 x 32 mm
Controller size: about 70 x x 45 x 23 mm
Connection voltage: DC 12V
Remote range up to 50 ft.
Transmitter equiped with long life.
Battery and power saver circuit.
Transimitter & receiver.
Visual indicator light shows remote operation.
Additional transmitters available to operate receiver.
Installs in minutes.
Transmitter replacement battery readily available.
Strong lanyard - helps prevent loss!
Power Source: 1x6F22 9V battery / remote control (Battery is included)
Fitment: Universal for Jeep ATV Truck

WARNING:
The wireless remote is designed for use on front mount self-recovery winches only.
The remote is not designed for and should not be used on winches or hoists in industrial applications (commercial car hauler/carriers, wreckers, cranes, etc.) or for any other remote controlled applications.
We suggest operate your winch as follows:
1. Disengage the clutch of your winch.
2. Pull out the winch wire rope about 1.5 meters.
3. Reengage the clutch of your winch.
4. Insert the plug of remote control receiver into the winches' solenoid control box female connector, if your wireless remote control is -03 type, you should properly connect the black earth line to the battery negative.
5. Put your receiver at a certain place.
6. Keep the antenna of receiver out and straight.
7. Pull out the antenna of transmitter, and move down the cover of your transmitter, bare out the control button.
8. Press the button, you can operate your winch start, stop, in or out.

Note:
1. (IMPORTANT) Instructions Is Included. Professional Installation Is Highly Recommended！
2. Please check the size measurement chart carefully before making payment.
3. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
4. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.

Package included:
1x Remote Control
1x Lanyard
1x Receiver
1x User Instruction