BLE TPMS Bluetooth 4.0, untuk sepeda motor sepeda motor sensor tekanan ban eksternal Android

10*10*4cm 0.1kg

BLE TPMS Bluetooth 4.0for Motorcycle蓝牙4.0摩托车外置TPMS

Reminder: APP will not be updated regularly, pleaserefer to the latest interface standard！

DESCRIPTION:

Thanks for choosing our BLE TPMS product which is designed for

smart cellphones and supports cellphone with Bluetooth 4.0 or

above. Once BLE tire sensor installed in wheel, tire pressure and

temperature can be displayed in cellphone with APP. During travel,

tire pressure and temperature displayed in real time and send alert

when statistics abnormal For your safety, please read manua

before using, thank you!

WARNING

Support cellphone with Bluetooth 4.0 or above Do NOT support

Cellphone with Bluetooth lower than 4.0. Product displays by

cellphone. During driving, please be careful when viewing tire

pressure and temperature in cellphone If tire pressure accelerates

down or up continuously, please stop car and check if theres any

problem with the tire. This product can read tire pressure and

temperature, but it cannot avoid sudden accident motorcycle by

tire It's important to use tire with high quality slightly tire leakage

makes tire pressure decreases over time is normal. It has nothing

to do with this product installation.

Sensor Specifications

Processor : ARM M0

Working voltage: 3V

Working Current: 100μA

Standby Current:≤2.2μA

Bluetooth Working Frequency: 2.4GHz

Bluetooth Transmitting Power: odBm MAX

Wait Time:≤5s

Display:Phone APP

Waterproof Standard: IP67

Working Humidity: 95% MAX

Tire Pressure Detection Range: 100-1300kPa

Tire Pressure Detection Accuracy: ±10kPa

Tire Temperature Detection Accuracy: ±3℃

Working Temperature:-30℃~+80℃

Storage Temperature:30C ~+85℃

Battery Capacity: 140mAh

Battery Life: 3-5 Years

Sensor Weight: 11 5g±1g

APP Description

Compatible Operating System

TPMS supports both Android and iOS, requires Bluetooth 4.0 or

above

APP Installation

Option 1: Scan QR code on card, then download and install;

Option 2: Search'motorcare'in APP Store or Google play store,

then download and install

温馨提示:APP会不定期进行更新,请以新界面为准。

产品简介

感谢你选择本公司的蓝牙胎压监测系统,该胎压监测系统是一款

专为智能手机设计的摩托车轮胎压力监测系统(TPMS),适用于蓝牙4.0

以上版本的智能手机,配合安装在车胎上的蓝牙胎压传感器接收两个

轮胎的气压和温度,在摩托车行驶程中对轮胎的气压和温度数据进行

监测,当数据出现异常时可及时报警,确保行车安全。

使用该产品前,请仔细阅读使用说明书,谢谢!

注意事项

本产品支持蓝牙40及以上手机,低于蓝牙40版本的手机无法与传感器

连接。

本产品为手机屏幕显示,车辆在行驶过程中,查看轮胎压力和温度时,

请注意行车安全。

若在行车过程中发现轮胎压力加速持续上升或降低,请停车检査轮胎

是否有漏气或其他问题。

本产品可有效的测量轮胎的压力和温度,但不能避免突发的轮胎安全

事故,因此选用质量好的轮胎同等重要。

一般轮胎会有正常的自然漏气现象,轮胎压力值会随时间降低,此为

正常现象,与安装本产品无直接关系。

传感器参数

内核: ARM MO工作湿度:95% MAX

工作电压:3V胎压侦测范围:100-1300kPa

工作电流:100μA胎压侦测准确度:±10kPa

睡眠电流:≤2.2μA胎温侦测准确度:±3℃

蓝牙工作频率:2.4GHz工作温度:-30℃~+80℃

蓝牙发射功率:0 dBm MAX存储温度:-30℃~+85℃

响应时间:≤5s电池容量:140mAh

显示方式:APP方式电池寿命:3~5年

防水等级:IP67重量:11.5g±1g